Pressure Sensitive Laminate Information
We offer a wide variety of laminates. Laminates offer extra protection from damage. Most laminates also offer protection from UV light to extend the useful life of the print or graphic

Pressure Sensitive Laminates Available
Lustre	Lustre is the most common laminate we apply. It has a slightly matte finish to reduce reflections while allowing colors to remain bright. Lustre laminate is 3.2mil thick.
Gloss	Gloss finish is a shiny almost glass like finish. This highly reflective surface will not dull any of the colors of the image. The gloss laminate is 3.2mil thick.
Poly-Velvet	Poly-Velvet is a hard durable polycarbonate material. It has a slightly textured finish that is almost like a lustre finish. The polycarbonate material is very scratch resistant. Poly-Velvet is commonly used on graphics that roll up for displays. It is available in 5mil, 10mil and 15mil thickness.
Poly back	Poly back is used on the back of graphics that will be rolled up. It adds extra rigidity to help prevent damage from kinks and helps keep the graphic flat. Poly back is available in 4mil & 14mil thickness.
Vinyl back	Vinyl back is used on the back of graphics that will be rolled up. It adds extra rigidity to help prevent damage from kinks and helps keep the graphic flat. Vinyl back is available in 10mil thickness.

Thermal Laminates
Thermal laminate is applied hot. It is more economical than cold laminates. Thermal is not recommended for inkjet prints or plastic materials that are affected by heat. Thermal laminate is normally used to encapsulate the graphic, or seal the graphic on both sides.

Thermal Laminates Available
Lustre	Thermal Lustre laminate has a slightly matte finish to reduce reflections while allowing most of the color to show through. Available in 3mil thickness.
Gloss	Thermal Gloss laminate has a shiny finish that does not restrict the vibrancy of colors to show through. Available in 3mil, 5mil, and 10mil thickness.