|
|
| |||||||||||||||||||||
| Mount Substrates Available | |
| Foamcore | Foamcore is a lightweight mount board with a foam center and a heavyweight paperliner on both sides. Available in 3/16" thickness. |
| Jetcore | Jetcore is similar to Foamcore with a foam center and heavyweight paper liner on both sides but is slightly thicker and less likely to warp. Jetcore is 1/4" thick |
| Rynoboard | Rynoboard uses higher density foam and a higher density paper liner to add more rigidity than Jetcore or Foamcore. Rynoboard is 3/16" thick and available in black. |
| Gatorfoam | Gatorfoam has a high density foam center and a hard veneer on both sides. It is used for mounting items that might not be framed. Gatorfaom is available either White or Black and also in 3/16" and 1/2" thickness. |
| Sintra | Sintra is an expanded PVC mount board. It is the most durable sub strate we use. We stock 3mm (1/8") and 6mm (1/4") thicknesses. The 3mm can be flexed into a slight curve. Sintra is almost impossi ble to dent. We stock both white and black. Other colors and thicknesses available as a special order. |
| Illustration Board | Illustration board is a cardstock that is about 1/16" thick |
Transmount is used when mounting items to clear acrylic. It is normally used to face mount transparencies to the back of acrylic. The adhesive used is optically clear so the image will remain sharp and vibrant.
| Transmount Substrates Available | |
| Clear Acrylic | Clear acrylic is similar to Plexiglass brand acrylic. It is a clear plastic material. We stock 1/8", 3/16" and 1/4" acrylic. Other sizes available by special order. |
| White Acrylic | White acrylic is similar to clear except it is a translucent milky white plastic. Transparencies are often mounted to the front white acrylic when more diffusion is needed. |